CEMENT BASED MORTARS
AND GROUTS

Waterproofing and
topping mortars
Concrete Admixtures
   
Admixtures for
lightweight
cellular concrete
   
Cement based mortars
and grouts
  - Anchoring mortars
- Structural restoring
- Waterproofing and topping
   mortars

- Special hydraulic binder
- Expansive agent
- Special mortars for
   ancient and
   historical buildings
   
Products for industrial floors
   
Release agents and
curing compounds
   
Special products
   
Resins for repair
and protection
   
Profiles for joints
   
Equipments
   
Index
   
   
Close catalogue
     
  DRACOSEAL  
     
  One component "osmotic" waterproofing mortar.


 
     
 
Consumption: 1,6 kg/m2 per 1mm thickness

Color: grey - white

Available in:
25 kg bags on 1.250 kg pallets
 
     
 

Used to waterproof walls, foundations, tanks etc. also in presence of negative pressure.
Apply by brush or spraying equipment.

 
     
  DRACOSEAL 2  
     
  Two component " osmotic" waterproofing mortar.


 
     
 
Consumption: 1,9 kg /m2 per 1 mm thickness

Color: grey - white

Available in:
25 kg bags + 7,5 kg plastic drums
 
     
 

Used to waterproof walls, foundations, tanks etc. also in presence of negative pressure; high adhesion and better resistance to sun and wind when still wet.
Apply by brush or spraying equipment (1mm in two coats).

 
     
  CONCRETE FINISHER  
     
  One component fibre reinforced mortar for waterproofing and low thickness Finishing.
 
     
 
Consumption: 1,8 kg/m2 per 1mm thickness

Available in:
25 kg bags on 1.250 kg palettes
 
     
 

Used as finishing and waterproofing layer for concrete walls, floors, foundations, etc.
Apply by spatula or spraying equipment in 2-3 mm. thicknesses.

 

  Credits - DRACO © 2003